Know the differences
to recognize
quality

Know the differences to recognize quality

For what we are different?

  • Product research and development

  • Safety and performance control during product’s stage of design

  • Automated production and certified quality tests in internal and external laboratories

  • After-sales support guaranteed

For what we are different?

  • Product research and development

  • Safety and performance control during product’s stage of design

  • Automated production and certified quality tests in internal and external laboratories

  • After-sales support guaranteed

Homogeneity and reliability

automation of each phase

100%

Automated
production

Our LED lamps are built
and controlled in every single
phase by fully automated
production lines.
During production phase,
components are automatically
tested and assembled.

100%

Automated
quality control

Every single lamp is 100% checked and tested.
Power on and off test, colorimetric test, luminous flux and electrical test provide guarantee of quality.

100%

Automated
packaging

At the end of unitary testing the lamps are automatically packaged, furthermore a final inspection of each packaging allows to highlight any packaging anomalies.

Homogeneity
and reliability

Automation of each phase

100%

Automated
production

Our LED lamps are built and controlled in every single phase by fully automated production lines.
During production phase, components are automatically tested and assembled.

100%

Automated
quality control

Every single lamp is 100% checked and tested.
Power on and off test, colorimetric test, luminous flux and electrical test provide guarantee of quality.

100%

Automated
packaging

At the end of unitary testing the lamps are automatically packaged, furthermore a final inspection of each packaging allows to highlight any packaging anomalies.

Materials Design and use

Last generation LED SMD assembled with automated machines

Connectors with automatic quick coupling without using wires

Double plate in oversized aluminum for better conduction and heat dissipation

Integrated parameter control of lamp electrical parts

Electronic components with index temperature higher than the standards

Reinforced aluminum heatsink for lamp body effective heat dissipation

Our technical laboratory

To guarantee quality and reliability over time

W

Electromagnetic compatibility

Thanks to our equipment we are able to carry out tests for electromagnetic compatibility, in order to place on the market products in compliance with European standards.

W

Thermal test

Inside a room protected from air currents and with controlled temperature / humidity,
we are able to perform thermal tests on all product’s components.

W

Duration test and aging analysis

Our tests certify the correct functioning of products over time, thanks to the monitoring of quality parameters performed constantly for the entire product’s life cycle.

W

Electrical insulation

Through the use of high voltage generators we perform insulation, earth continuity and current leakage tests, to carry out a complete analysis of safety for any of our device.

W

Photometric laboratory

Thanks to our tools, we design, develop and control light sources, in a photometric, radiometric and colorimetric aspect.

Materials design and use

pointer

Last generation LED SMD

Last generation LED SMD
assembled with automated machines

pointer

Connectors with automatic quick coupling

Connectors with automatic quick coupling without using wires

pointer

Double plate in oversized aluminum

Double plate in oversized aluminum for better conduction and heat dissipation

pointer

Integrated parameter control

Integrated parameter control
of lamp electrical parts

pointer

Electronic components

Electronic components with index temperature higher than the standards

pointer

Reinforced aluminum heatsink

Reinforced aluminum heatsink for lamp body effective heat dissipation

Our technical laboratory

To guarantee quality and reliability over time

Electromagnetic compatibility

Thanks to our equipment we are able to carry out tests for electromagnetic compatibility, in order to place on the market products in compliance with European standards.

Thermal test

Inside a room protected from air currents and with controlled temperature / humidity,
we are able to perform thermal tests on all product’s components.

Duration test and aging analysis

Our tests certify the correct functioning of products over time, thanks to the monitoring of quality parameters performed constantly for the entire product’s life cycle.

Electrical insulation

Through the use of high voltage generators we perform insulation, earth continuity and current leakage tests, to carry out a complete analysis of safety for any of our device.

Photometric laboratory

Thanks to our tools, we design, develop and control light sources, in a photometric, radiometric and colorimetric aspect.

Tracciamento del prodotto
per garantire il controllo
della qualità nel post vendita

Le lampade LED WIVA sono identificabili dal codice prodotto e dal lotto di produzione univoco stampato sul corpo della lampada stessa e sull’imballo. Ogni singolo prodotto, in entrata ed in uscita dai magazzini logistici Wiva Group è identificato e registrato per una completa tracciatura dei singoli lotti di produzione che consente di identificare la singola linea di produzione, la data di costruzione e ciascun singolo componente utilizzato.

Product tracking to ensure quality control after sales

The WIVA LED lamps can be identified by the product code and the unique production lot printed on the body of the lamp itself and on the packaging. Every single product, entering and leaving the Wiva Group logistic warehouses is identified and recorded for a complete tracking of the single production batches which allows to identify the single production line, the construction date and each single component used.

preloader